Experimental principle. a Schematic diagram of the readout circuit for the accelerometer. b Experimental setup of the readout circuit board with simply packaged MEMS die. c Schematic diagram of the experiment setup. d Experiment setup.
Microelectromechanical systems (MEMS) accelerometers play a critical role in high-precision applications such as gravity measurement, structural health monitoring, and inertial navigation. However, improving their resolution has long been a challenge due to limitations in noise floor and sensitivity. Conventional approaches often rely on bulky proof mass and complex structures. The need for a more compact and high-sensitive accelerometer that overcomes these constraints has driven researchers to explore novel design strategies.
Now, a team from ShanghaiTech University and the Shanghai Institute of Microsystem and Information Technology has addressed this challenge with a novel design. Their , published in on March 5, 2025, introduces a MEMS accelerometer featuring an advanced anti-spring mechanism. By employing two pre-shaped curved beams, this mechanism enables stiffness softening with reduced bias force and displacement—achieving a 10.4% increase in sensitivity while reducing the noise floor and bias instability.
The core of this innovation is the anti-spring mechanism, which consists of two clamped-clamped pre-shaped curved beams arranged in parallel. Unlike existing designs that require large proof mass to enhance sensitivity, this approach achieves the same effect by significantly reducing the required bias force and bias displacement for achieving quasi-zero stiffness. The required bias force and displacement are reduced by an order of magnitude compared to conventional approach. The research team validated their concept through both theoretical modeling and finite element method (FEM) simulations. A fabricated prototype, with a core chip size of just 4.2 mm × 4.9 mm, demonstrated a 10.4% increase in sensitivity of 51.1 mV/g, a 10.5% reduction in noise floor of 21.3 μg/√Hz—providing a feasible pathway for enhancing the performance and miniaturization of MEMS accelerometers.
"This novel anti-spring mechanism marks a significant advancement in MEMS accelerometer technology," said Dr. Fang Chen, one of the lead researchers. "By enabling stiffness softening with minimal bias force, we have not only enhanced sensitivity but also achieved a more compact and integrable design. This breakthrough opens new doors for high-precision sensing in a variety of fields."
The impact of this research extends across multiple industries, particularly in applications requiring precise acceleration measurements. The compact and high-performance design makes this accelerometer ideal for building high-density, low-cost, and high-precision acceleration measurement system and network. Future research will focus on refining bias tuning structures and optimizing interface circuits to further improving the MEMS accelerometer performance.
###
References
DOI
Original Source URL
Funding Information
This work was supported by the National Key Research and Development Program of China Nos. 2022YFB3205000, 2022YFB3205004, and 2024YFB3614100; the National Natural Science Foundation of China (NSFC) 61974156, the Foundation of the Key State Laboratory of Transducer Technology SKT2303, and Jiangsu Provincial Key Research and Development program BE2023048.
About
is an online-only, open access international journal devoted to publishing original research results and reviews on all aspects of Micro and Nano Electro Mechanical Systems from fundamental to applied research. The journal is published by Springer Nature in partnership with the Aerospace Information Research Institute, Chinese Academy of Sciences, supported by the State Key Laboratory of Transducer Technology.
RSS